WHY SANDSTONE PAVERS AND TILES MAKE A GREAT CHOICE FOR OUTDOOR TILES AND POOL PAVERS HERE IN MELBOURNE

SANDSTONE PAVERS, TILES – THE FACTS YOU NEED TO KNOW

Sandstone pavers come in several different colors and designs. While some homeowners love the look of pale gray and light blue pavers, others like the more natural look of tan and brown. The lighter shades often resemble slate and other more expensive materials, but the cost of sandstone pavers is less than the cost of other types of pavers. Often used for patios and paths, homeowners will find that they can use sandstone in a variety of ways around their home. Though some focus primarily on the cost of those pavers, they also need to think about the advantages, disadvantages and how they want to use those pavers.
The Costs
Average cost of sandstone pavers: Between $28 – $50m2 inc GST (dependent on colour, size and surface finish).

Sandstone Paver Ideas
While sandstone is durable enough to use in kitchen or bathroom counters, most homeowners opt for outdoor installation. The material is durable and strong enough that it can handle constant use, and it works well around swimming pools and other water features. Sandstone pavers placed side by side can make an elegant and gorgeous patio, and some homeowners use the pavers to make pathways that connect multiple outdoor entertaining areas or to connect a swimming pool to a patio. Designers also use sandstone pavers on top of gravel, which makes the pavers appear to float over the surface of the ground.

Installing Pavers
Installing sandstone pavers is as easy as installing any other type of pavers, but after looking at how much time the project takes, many homeowners decide to hire a contractor or a professional installer to do the job. When placed directly on the grass, sandstone can slip and move, which can cause injuries. It’s important to use an aggregate material on top of the grass that keeps the pavers from slipping.

Designers will typically work out the finished design with the homeowners and arrange the pavers on the ground, giving the homeowners the chance to decide if they want to make any changes. The designer will then mark the ground around each paver and remove the pavers. He or she removes the top layer of grass and dirt, adds a layer of sand or gravel and smooths out the material. After ensuring that the level is even, the designer will place the pavers on top of the material. While some might assume this is the last step, the designer will still need to add more gravel to the top. The gravel falls between the pavers to add an additional layer of protection.

Advantages of Sandstone
One of the biggest advantages associated with sandstone is that the material is naturally porous. Other materials, including slate, aren’t porous. When water splashes on top of the pavers, it pools on top and forms puddles that make the pavers slick. When water reaches sandstone, the pavers will pull the water into the stone and let it slip out the bottom. This makes the material great for use outside near a swimming pool, pond or another type of water feature.

Many homeowners prefer sandstone over other materials because it is a natural material. They don’t need to worry about manufacturers releasing toxins into the environment or what their purchase will mean for the environment. Manufacturers break large sandstone blocks into individual pavers, and they can further break down those pieces into smaller pavers and pavers with unique or unusual designs.

Sandstone Disadvantages
Though sandstone has a number of advantages, homeowners should also beware of the potential problems with the material. The first is that the installer of the sandstone should offer to seal the material. As sandstone is porous, it can easily develop stains. Spilling a glass of soda or wine on the ground can cause the pavers to develop dark gray, brown or red stains on the surface. Stains can also occur as people walk across the pavers and transfer dirt and mud onto the stone. Homeowners can buy pavers already stained from manufacturers, or they can opt to seal the pavers before or after installation.

Many homeowners don’t think about maintenance and upkeep when choosing outdoor features. While sandstone is a strong material, it requires 6-12 monthly cleaning with a domestic gernie. This also typically involves sweeping off any debris prior to water jet blasting with your gernie. Homeowners will also need to purchase a specialty cleaner that they mix with water, apply to the sandstone and rinse off with additional water. Using the wrong cleaning material can leave behind stains or even damage the sandstone.

Cost of Sandstone
As sandstone is a natural material, it costs a little more than concrete. The cost of finding the sandstone and breaking the stone into smaller pieces adds to the overall cost. Natural stone pavers typically cost between $28 – $50m2 inc GST (dependent on colour, size and surface finish), but sandstone pavers are often on the lower end of that price range. Materials like slate and granite are more expensive than sandstone. The cost of the individual pavers also depends on the shape, size and design that the homeowners choose. Pavers in unique designs and shapes other than squares, including round designs, often cost more.

Homeowners also need to consider some other factors when choosing sandstone. If they buy the pavers directly from the manufacturer, they need to arrange for shipping or delivery, which can add a few hundred dollars to the cost. Many people also forget to look at the cost of labor and installation. It can take up to 30 hours to complete the project, depending on the size of the project. Some homeowners will even find that it takes several weeks before the installers complete the project.

Installation costs can easily add an extra $1,000 or more to the total cost. Most laborers charge an square meter fee, and homeowners are responsible for paying the prescribed rate for every person working on the job. Those who decide to do the job themselves will need to factor in the cost of renting the equipment needed for the job, including a masonry saw. After looking at the rental costs, many homeowners may decide to go with a contractor who already has that equipment.

sandstone-steps-and-paving

 

 

CRAZY PAVING

 

 

pool-paving-sandstone-crazy-paving

TRAVERTINE – OUTDOOR TILES AND PAVERS ARE NON SLIP FOR PAVING AROUND POOLS OR SIMPLY AS PATHWAYS

You can never go wrong with travertine tiles or pavers when looking for the perfect landscaping solution. These are versatile materials that are functional and aesthetically pleasing for any outdoor application, such as your patio. Using travertine pavers for your patio will result in an elegant and sophisticated outdoor leisure area where you can relax and entertain guests. They are excellent for patios and other outdoor applications due to their naturally non-slip surface, which provides better grip to prevent you from slipping and falling (especially when the ground is wet). And since the pavers are made of natural stone, your travertine patio, pool paving can blend harmoniously with your home’s natural surroundings.

Being made of natural stone, travertine is among the most durable materials used for landscaping and building a patio. Their incredible strength and resilience are proven by ancient Roman structures, such as the Colosseum, which still stands today, even if it is centuries old. Travertine is virtually unbreakable, and it can withstand weights up to 8,000 lbs. per square inch. Hence, you are investing in a material that can last for generations while adding immense value to your home.

The best travertine to use for your patio or pool have a brushed unfilled surface and are about 12mm thick for tiling over an existing slab OR 30mm thick for paving on a compacted sand base. They can either be in a tumbled or brushed and chiseled finish, both of which come with properties that can make them slip-proof. Go for a chiseled finish if you want to achieve an old world or rustic look that is reminiscent of Renaissance castles and courtyards, or a tumbled finish for a more contemporary look and feel. If you are not sure which type of finish or color to use, consider ordering free samples from a reputable natural stone supplier.

Seasoned architects and builders who specialize in building luxury homes recommend travertine pavers because the material is low-maintenance, easy to maintain, and capable of standing up to extreme weather conditions. In case grit, soil, and sand is present on your patio, you can easily get rid of them with a damp cloth.
white-travertine-pool-coping-and-paving

walnut-insets-with-ivory-travertine-pool-tiles

travertine-ivory-color-pool-coping-and-paving-tiles

POOL PAVERS AND COPING IMAGES AND PHOTO’S

POOL PAVERS AND NATURAL STONE COPING IMAGES OF INSTALLATIONS ON FIBERGLASS AND CONCRETE POOLS

 

Swimming pool renovations and new pool installations in Australia are certainly on the rise. With the average price for a renovation being around $25,000 – $35,000 compared to a new pool installation of between $70,000 – $110,000. Non slip natural stone pavers sales, when paving around a swimming pool are up around 100% year on year. Below are images of suitable natural stone pool pavers and pool edge coping on fibreglass and concrete pools. If you are after more information on pool paving and coping tiles please call us on (03) 9706 9767.

Bluestone pool coping and pavers

Harkaway Bluestone pavers and 40mm drop face edge pool coping.

Bluestone Pool Coping Rebated square edge

Harkaway Bluestone 40mm drop face pool coping pavers.

Golden mint pool coping and pavers

Himalayan Honed Sandstone bullnose pool coping and matching pool pavers.

Teakwood Bullnose edge pool coping and pavers

Teakwood Sandstone pool pavers with 30mm bullnosed pool coping matching pavers.

Travertine Tile Colors

Travertine has a wide variety of colors on offer. Stone and Slate Discounts wide range of Travertine Tiles comes in various sized tiles and surface finishes aswell as French Pattern.

Free Samples

Below you can see a list of all the Travertine colors we have on offer. Some of our products are a special order which is approximately 8-10 weeks.

Travertine Colors:

Walnut – A variety of mid range browns from dark tan to milk chocolate.

Noce – Shades of walnut that range from medium gold to dark coffee.

Cappuccino – Deep tones of brown.

Light Ivory – Tiles with a hint of gray that creates a silvered appearance.

Light – Pale cream or ivory.

Silver Gray – A heavily striated dark gray travertine.

Classico – A uniform color and patterning that resembles natural cork.

Beige – Ranging in color from lightest ivory to pale fawn.

  • Although some colors are darker than others, because Travertine is a porous stone they will all require sealing. Sealing will need to be re-done every 3-4 years depending on how much the area is used. If it is a food and drink area or around a pool these areas will need to be cared for and sealed more frequently or when needed.
  • We offer two sealers. Both sealers are penetrating which means they seep into the stone to protect it, instead of a surface sealer which sits on the surface of the stone.
  • Sealers are available in clear or enhance. Neither will effect the texture of the stone but the enhance sealer will darkening the stone up to 40%.
  • Sealers start at an affordable price of $60 per Liter, you can purchase the sealer in larger quantities for a more affordable option.
  • If the sealer is stored in a cool dry place it will last up to 24 months.

Silver Grey Travertine French Pattern (2)

Above you can see the Silver Grey Travertine being used for pool paving in French Pattern, the surface of this product is unfilled, tumbled and brushed.

We offer free samples – express posted of all of our products.
Deliveries available Australia Wide including all country towns.
For any enquiries contact us today on (03) 9706 9767.

What is the price of Travertine Tiles?

WHAT IS THE PRICE OF TRAVERTINE TILES?

 

Travertine tiles and pavers have a rich heritage dating back to Roman times. They have always had a rich and luxurious allure attached to them.
Travertine was used exclusively in building the Roman Colosseum and was the dominant stone used in building the Roman Forum. Basically if you were a noble in Roman times your house had a lot of travertine in it.
Nowadays Travertine is not used as a building material but as floor and wall tiles and outdoor pavers. Up until around 2012-2013 travertine tiles and pavers were always VERY expensive and exclusive. It was around this time that Travertine quarry’s in Turkey and Iran doubled production through better mining and production techniques flooding the export market with Travertine tiles and pavers.

This glut in the travertine market lead to a decrease in prices in the Australian market in general. Slate and Stone Discounts then negotiated directly with one of the quarry owners in Turkey. Guaranteeing the purchase of very large quantities of pavers and tiles in return for heavily discounted prices.
This has led us to be a market leader in Travertine Tiles and Pavers regarding value for money. We constantly sell our travertine for less than our competitors sale prices. An example of travertine prices is as follows:

French Pattern Travertine Tiles $49m2
610×406 Travertine Tiles $49m2
610×406 30mm thick pavers $79m2

610x406x30mm Pool Coping $24-$28pc

Travertine Tiles in a bathroom

Ivory Travertine Honed and Filed Tiles have been used for the bathroom above. The stone comes from Istanbul Travertine Quarries in Turkey. We have tiles and pavers in various sizes in 12mm and 30mm thickness, we can custom order sizes to suit your needs.

French pattern Ivory travertine tiles and pool paving

Ivory Travertine unfilled and tumbled honed surface pavers and bullnosed pool coping.

Cleaning and Installation of Stone Cladding

CLEANING AND INSTALLATION OF STONE CLADDING:

Installing stone cladding is also commonly known as stack stone installing and it is also used to create a decorative design in and outside of buildings. It is made of by using stone that approaches from quarries to create a natural look. Whatever it is used for, it will need to be cleaned sometimes to ensure that the stone cladding does not get damaged. You will need to use a hose and a bucket of water to clean stone that is situated outside. Use a soft bristled brush to clean the surface with before you rinse it off well with fresh, clean water.

Installing stone cladding is also commonly known as cultured stone installing. It is also used to create a decorative or good looking in and outside of buildings. It is made of by using stone that approaches from quarries to create a natural look. Whatever it used for, it will need to be cleaned sometimes to ensure that the stone cladding does not get damaged from the outside elements.

Not all types of cladding require you to seal it, but if you are living in a coastal area, you should seal the cladding directly after installation. This is primarily to protect the stone veneer against the elements and sea air, which will cause discoloration over time.
Stone cladding, also known as stack stone or stone cladding is used for a decorative look it will also give any area character. It is manufactured using stone from quarries and made to look like natural stone. No matter what it is used for, it will need to be cleaned at some point in time. However, care must be taken when cleaning the stone cladding so it does not get damaged.

For cleaning stone veneer that is inside you will need a bucket of water with mild soap or detergent, and a cloth. Using the clean cloth, wash the stone then immediate rinse each stone with clean water.

Be careful to never use a cleaner that contains acid or an acid based product. Do not use a high pressure power washer as the spray that it generates is too forceful and will damage the stone.

 

3D Stone Cladding

Stack Stone

Stack Stone Wall Cladding

 

Stack stone will add texture and warmth to your home. It is a unique three dimensional veneer composed of cut stone pieces. The pieces come attached to a cement sheet backing and they are installed in modules like tiles. You can find these panels in most home and supply stores and tile showroom. No grout is needed, you simply use a walling adhesive.

Demand for stack stone is growing. There are various designs that can be widely used to decorate walls, fireplaces, water features and more. Built from natural stone, stack stone calddinng comes in various different colour from brown to red to grey to brown, stack stone adds a warm ambiance to any space.

With growing demand for adding aesthetic charm to any space, stack stone is the perfect choice to give any room charm and to decorate walls, fireplaces, stone veneers, and water features. Built from NATURAL STONES, stack stone cladding comes in various shades ranging from red to brown to grey, add a warm ambiance to the space.
Stack stone is often used in landscaping, around pools and other water features, and on the front of buildings. Take at look at some of the examples below:


 

FOR PRICING ON OUR STACK STONE PLEASE CALL (03) 9706 9767.

WE DELIVER ALL AROUND AUSTRALIA!!!!

Light weight stack stone 3D Stack Stone

Granite Tiles the hard cold facts

Why Granite Tiles
Granite tiles are an ideal choice because of the huge range of stone colours, textures and sizes which makes granite suitable for indoor, outdoor, residential and commercial scale design projects. Granite Tiles are available in custom sizes. The surface finishes available on granite tiles are as follows:

HONED FINISH – Generally used for indoor floor or wall tiles ONLY.

POLISHED FINISH – As per honed finish.

SANDBLASTED FINISH – Great indoors or for use as outdoor tiles due to there HIGH non slip rating. Not as rough as exfoliated/flamed OR shot blasted.

EXFOLIATED FINISH – Great for indoor floor or wall tiles and especially suited for use as outdoor tiles or swimming pool tiles.

SHOT BLASTED FINISH – ONLY recommended for use as outdoor tiles around swimming pools or on driveways.

 

 

Granite Tiles

Granite Pavers

GRANITE PAVERS

Granite is an ideal choice when it comes to choosing your pavers, with its hard wearing surface and durability granite pavers are alot harder to scratch or chip. They are perfect choice for any high traffic area.

    Granite Pavers can be used in the following applications:

      • Pathways/walkways. Walk with a sense of security and privilege on walkways made of premium granite pavers.
      • Outside alfresco area. If your property has an outside alfresco area, then using granite to accentuate it will make it more appealing to onlookers.
      • Driveways. With granite being a tough paving material, it can be used to pave driveway lanes. Granite pavers can withstand heavy loads and you can surely expect decades of service from your granite-paved driveway.
      • Pool areas. With the right granite texture, you can expect to have a slip-proof pool area all-year long.
      • Steps. You will surely feel absolutely regal as you walk over attractive granite steps.
      • Garages. While poured concrete will do, wouldn’t it be nice to make your driveway more elegant and classy by using granite pavers for its flooring?
      • Patios. Add a luxurious feel and look to your patio with granite. You can create practically any theme with the dozens of granite paver colors, finishes, shapes, and textures that you can choose from.

Granite Pavers Raven Granite Pavers

Cleaning Travertine Tiles and Pavers

 

Cleaning Travertine Tiles & Pavers

A lot of people seem to think all stones are stain proof, If left unsealed spills and everyday messes can easily penetrate the surface of your Travertine.
Every once in a while you may need to clean your Travertine, especially if it’s in a high traffic area or an outside area. There are many affordable cleaners available for Travertine, when cleaning be sure to apply with a mop and if stains are persistent use a more concentrated solution. Do not use any high pressure cleaning equipment when cleaning your tile or paver as it will damage the stone.

Removing stains from your Travertine

If you have a spillage on your Travertine be sure to remove the stain straight away by blotting it up, do not rub it into the Travertine as it will only make it harder for the stain to be removed as the stone. IF the stain remains after light cleaning simply apply a poultice to draw the stain out overnight.

Do NOT clean your Travertine with cleaners that contain lemon, orange, ammonia or vinegar.

 

GRANITE

Travertine French Pattern

 

Travertine French pattern

Using four different sized travertine pavers creates a french pattern, The biggest advantage when using french pattern is its versatility in design, its ability to work within almost any space, and the character and beauty.

The travertine pavers come in four different sizes to make up the french pattern, all pavers are 12mm thick.

  • 400x400x12mm
  • 600x400x12mm
  • 200x400x12mm

They are the 3 different sizes used in french pattern.

travertine french pattern pavers

Travertine Pavers

The key difference between travertine and other natural stones lies in the formation of the rock, the hardness of the stone and the appearance.

You can get different types of travertine pavers, which all come in ivory, classico, walnut and silver grey.

TUMBLED – The edges of the tiles have been tumbled giving a time worn, rustic appearance

POLISHED – Polished travertine is a smooth fully honed surface which is suitable for all indoor areas.

HONED – A honed stone has a smooth texture and finish that is achieved by grinding one side of the unfinished stone. The finish can range from a dull matte to a satin or high sheen.

Travertine Bullnoses tumbled edge IVORY 610X406X30mm: $22 per piece inc GST
Travertine IVORY classic bullnose edge 610x406x30mm: $28 per piece inc GST

Travertine Bullnoses tumbled edge SILVER GREY 610X406X30mm: $29 per piece inc GST
Travertine SILVERY GREY classic bullnose edge 610x406x30mm: $38 per piece inc GST

travertine-finish-tumbled-polished-chiseled-honed-filled

Travertine Tiles

In and around your home you are only wanting to use the highest quailty proudct, Travertine Tiles are a great choice whether it be for your outdoor alfresco area to your bathrooms.
Travetine Tiles come in a varity a finishes to suit all areas.

Unfilled and tumbled Travertine tiles are perfect for around your pool as they have a smooth texture whilst also being non-slip.
Honed and Filled Travertine tiles are suitable for all indoor areas, including bathrooms and kitchen areas.

When selecting pool coping tiles its it important to choose the correct tile that can withstand the salt and chemicals that will be found in your swimming pools water.

travertine pool edge pavers with a squre edge

Travertine Pavers

 

7 Tips on how to protect and clean travertine

TIPS

If choosing travertine Pavers for any area, it is important to know the correct way to clean and look after the product as travertine pavers are susceptible to stains especially unfilled and tumbled if they are not sealed correctly, due to the stone being less dense and sensitive to acidic liquids.

1).Test and seal the tone – Travertine that has been installed in any food or drink areas need to sealed especially on bench tops and floors, Sealing your Travertine will ensure your stone is stain resistant.

2). Clean up spills immediately – Travertine is a sensitive stone for sauces, carbonated beverages, red wine and any acidic drinks or food. When cleaning spills do not use bleach, vinegar, lemon or orange cleaning agents, ammonia or any brought products that have been purchased that contain acids, alkalis or other chemicals when cleaning travertine stone.

3). Use a dry dust mop weekly – Instead of vacuuming your travertine floor you will need to use a clean dry dust mop, Vacuuming will create chips and cracks in your flooring. Once a week you can use a wet mop with hot water with a travertine tile cleaner.

4). Protecting your stone When possible you should use door mats and carpet runners to protect your stone from dirt and elements that will damage the travertine. Countertops and baths, use coasters for all drinks and decorative trays to protect the travertine from cosmetics and bath products like colognes, perfumes, oils, soaps and other toiletries. Prevention is the best remedy when it comes to maintaining travertine.

5). Poultices for stubborn stains — If the travertine gets stained and you can’t fix the problem through the normal cleaning procedures; a poultice may be the solution. Create a paste by combining a formulated stone cleaner with baking powder. Smooth this over the stain and cove with a clear plastic wrap. Let it stand for several days and the poultice will slowly draw the stain out. Remove the poultice with warm water and buff with a cotton cloth or chamois.

6). Stubborn Stains If you have a serious stain that has penetrated the stone and remains there after you’ve resourced all cleaning processes. You can use Alkaline cleaner, which can be purchased from any stone and tile supply store, this should be a last resource when cleaning travertine stone.

7). Ask a professional – Travertine is a great choice of stone for areas of your home and its a hot item which is a popular selling point for real estate agents. before you purchase travertine you should always ask a professional your limits and efficiency of this type of stone. A professional will also have the answers to all your questions in regards to the proper care and how to avoid and damages to your stone.

Travertine pool pavers unfilled Ivory

POOL PAVERS IMAGES AND PHOTO’S FINISHED PROJECTS

POOL PAVERS SANDSTONE
This swimming pool in Sydney has HIMALAYAN SANDSTONE PAVERS in the paver size of 500x500x15mm with a natural split surface. The pool coping is HIMALAYAN SANDSTONE PAVERS with a honed surface finish.

honed sandstone pool pavers
Hymalayan honed sandstone pool pavers and matching pool coping have been layed around this salt water swimming pool in Melbourne

TEAKWOOD SANDSTONE POOL PAVERS
TEAKWOOD SANDSTONE pool pavers along with matching bullnosed pool coping tiles were installed around this swimming pool on the Sunshine Coast.

Stacked Stone, Stack Stone, Wall Tiles, Stone Wall, Stackstone

STACKSTONE

We have dozens of various colours and styles of stack stone.
Light weight stack stone cladding with a 3D geometric style: Modern twist on a natural stone look mounted onto a stack stone panel for easy installation.
Ledgestone, stack stone cladding: Drystack look, rugged look, Individual pieces are MUCH bigger BUT still mounted on a stack stone panel for easy installation of your stone cladding.
Loose Random Stone Wall Cladding: Natural Free Flowing Format stone cladding for walls. A bit slower to install BUT what a look.
See our stack stone range here.

Bluestone Pool Coping

 

Bluestone pool coping

 

 

 

 

 

 

 

 

 

 

 

 

 

Custom made curved sandstone pool coping tiles have been installed on thiS chlorinated swimming pool in Melbourne. The client supplied Steve Taylor ( Master Stonemason) with the templates, which Steve duly checked prior to manufacturing. View our entire bluestone range here.

Curved Bluestone Pool Coping Tiles

Bluestone Pool Coping and Pool Pavers

 

Custom made curved sandstone pool coping tiles have been installed on this salt chlorinated swimming pool in Melbourne. The client supplied Steve Taylor ( Master Stonemason) with the templates, which Steve duly checked prior to manufacturing. View our entire bluestone range here

Sandstone pavers supplier

SANDSTONE PAVERS SUPPLIER QUARRY TO YOU

sandstone pavers supplier

STONE-PAVERS source our sandstone pavers, tiles, paving and cladding direct from the quarry owners. Our team of Master Stonemasons, led by Steve Taylor visually inspect the raw sandstone block prior to cutting to ensure it lives up to our Australian standards for sandstone pavers.
Prices are negotiated directly with the quarry owners to ensure that we are getting not only the best block BUT to ensure also BEST PRICES. This enables us to sell QUALITY sandstone pavers, tiles, paving and cladding at wholesale prices direct to you the consumer.

Visit our SANDSTONE PAVERS range.