Call: 9706 9767

European Bluestone- 500x500x30mm

$19.50 $17.90



*Please add required per piece value in the cart. 

SKU: N/A Category:



PRICES start from a LOW $6.50 per piece inc GST For a great PRICE, extremely durable bluestone pavers with the epitome of bluestone’s natural beauty. We recommend you follow the following guidelines when purchasing our BLUESTONE: 12mm thick: tiles should be laid directly onto a concrete slab or great for balconies, decks or indoor floor tiles. 20mm thick: pavers can be laid as above OR onto a compacted road base into a wet slurry of sand and cement 30mm thick: pavers can be laid as both above or onto a compacted road base into a dry sand bed, great for tiling over easements or where you require water permeation. There will be some cats paw present in this stone. Generally, a tile will only have a MAXIMUM of 10-15% of surface coverage. Expect a dimensional or thickness variation of +-3mm. We HIGHLY recommend laying in a brick pattern with a 8mm grout joint.

SIZES AVAILABLE are as follows….. 600x300, 400x400 800x400 in 12mm 600x300, 400x400, 500x500, 800x400, 1000x500 in 20mm and also 30mm thickness

MATCHING POOL COPING available in Drop Down, Bullnose, Bevel Edge The European has a medium grey colour with cool blue undertones. As a result, they make excellent pool pavers and pool coping tiles as they enhance the blue colour of your pool. If you need a hand or have any questions regarding bluestone, give our Stone Experts a call: (03) 9706 9767 or contact us here.


Additional information



Installation Guidelines

We recommend that you grade the pavers into 2-3 thickness groups prior to installation. This is easily done as you are taking the tiles out of the crates and will also mix any variations in colour through the job from different crates.

15mm is recommended to be ONLY layed in a rapid setting adhesive and please use a 6mm trowel as follows…. Notch out 6mm of adhesive on the slab and 6mm cross notched on the back of each tile. Also please lay in BRICK or STRETCHER BOND patterns and allow for a 8mm minimum grout joint to allow for any tile variations in length or width. DO NOT ACID WASH your pavers. 


Bluestone tiles and pavers can be sealed as a peace of mind to ensure bluestone stays in pristine condition. It’s highly recommended particularly in areas where there may be high spillage to protect the lustre of the bluestone tiles and pavers.

If you choose not to seal your tiles, make sure you clean up spills immediately to avoid staining the tiles. Use only a penetrating invisible type sealer (no colour change) similar to Tasman Chemicals STONE SHIELD and ALWAYS follow the sealer manufacturers instructions when applying. We stock a FULL range of suitable sealers.


Do not use Hydrochloric acid for clean up as this can cause minerals present in the stone to react adversely.To clean prior to sealing simply pressure wash the stone and ensure nozzle is never closer than 300mm to the surface of the stone.


Just sweep when needed. Bluestone responds well to high pressure cleaning with a domestic machine, please keep the nozzle about 300mm minimum away from face of the bluestone pavers and tiles. A solution of mild detergent and water can be applied prior to pressure cleaning.

Standard Grade V Premium Grade

Here we will discuss the different characteristics of these two distinct bluestone categorisations.

Generally speaking, Standard Grade Bluestone will have the following characteristics:

A higher percentage of tiles or pavers containing naturally occurring catspaw, between 3-15% of the surface of the tile.

Cutting tolerances during the process of slicing the bluestone boulders up into tiles or pavers. In this case, a variation or tolerance allowance of +-3mm is to be expected. This leads to the occasional tile or paver being slightly out of square and is the reason why we recommend laying ONLY in a brick bond or stretcher bond pattern (which may fix these issues). If laying in adhesive, we recommend using a 6mm notch trowel to spread the adhesive BOTH on the slab and on the entire back of every tile or paver in a cross thatched pattern.

In some rare instances where some Ferro particles may be in the catspaw, it should be noted that these can be hidden during the grouting process.

The non-slip rating is HIGHER due to the sawn surface finish during the cutting process.

Premium Harkaway Bluestone comparison:

Less naturally occurring catspaw, usually around 0-5% of any tile or pavers surface.

Variation or tolerance allowance of +-1.5mm is to be expected.

Naturally occurring light surface pattern and colour variations may be present compared to standard grade.

Surface finish is lightly honed, giving a slightly smoother finish, however, is still classified as a non-slip surface.

You may also like…

Contact Us
close slider