CLEANING AND INSTALLATION OF STONE CLADDING:
Installing stone cladding is also commonly known as stack stone installing and it is also used to create a decorative design in and outside of buildings. It is made of by using stone that approaches from quarries to create a natural look. Whatever it is used for, it will need to be cleaned sometimes to ensure that the stone cladding does not get damaged. You will need to use a hose and a bucket of water to clean stone that is situated outside. Use a soft bristled brush to clean the surface with before you rinse it off well with fresh, clean water.
Installing stone cladding is also commonly known as cultured stone installing. It is also used to create a decorative or good looking in and outside of buildings. It is made of by using stone that approaches from quarries to create a natural look. Whatever it used for, it will need to be cleaned sometimes to ensure that the stone cladding does not get damaged from the outside elements.
Not all types of cladding require you to seal it, but if you are living in a coastal area, you should seal the cladding directly after installation. This is primarily to protect the stone veneer against the elements and sea air, which will cause discoloration over time.
Stone cladding, also known as stack stone or stone cladding is used for a decorative look it will also give any area character. It is manufactured using stone from quarries and made to look like natural stone. No matter what it is used for, it will need to be cleaned at some point in time. However, care must be taken when cleaning the stone cladding so it does not get damaged.
For cleaning stone veneer that is inside you will need a bucket of water with mild soap or detergent, and a cloth. Using the clean cloth, wash the stone then immediate rinse each stone with clean water.
Be careful to never use a cleaner that contains acid or an acid based product. Do not use a high pressure power washer as the spray that it generates is too forceful and will damage the stone.