Cleaning and Installation of Stone Cladding

Cleaning and Installation of Stone Wall Cladding Tiles

 

[CLEANING AND INSTALLATION OF STONE CLADDING: Installing stone cladding is also commonly known as stack stone installing and it is also used to create a decorative design in and outside of buildings. It is made of by using stone that approaches from quarries to create a natural look. Whatever it is used for, it will need to be cleaned sometimes to ensure that the stone cladding does not get damaged. You will need to use a hose and a bucket of water to clean stone that is situated outside. Use a soft bristled brush to clean the surface with before you rinse it off well with fresh, clean water. Installing stone cladding is also commonly known as cultured stone installing. It is also used to create a decorative or good looking in and outside of buildings. It is made of by using stone that approaches from quarries to create a natural look. Whatever it used for, it will need to be cleaned sometimes to ensure that the stone cladding does not get damaged from the outside elements. Not all types of cladding require you to seal it, but if you are living in a coastal area, you should seal the cladding directly after installation. This is primarily to protect the stone veneer against the elements and sea air, which will cause discoloration over time. Stone cladding, also known as stack stone or stone cladding is used for a decorative look it will also give any area character. It is manufactured using stone from quarries and made to look like natural stone. No matter what it is used for, it will need to be cleaned at some point in time. However, care must be taken when cleaning the stone cladding so it does not get damaged. For cleaning stone veneer that is inside you will need a bucket of water with mild soap or detergent, and a cloth. Using the clean cloth, wash the stone then immediate rinse each stone with clean water. Be careful to never use a cleaner that contains acid or an acid based product. Do not use a high pressure power washer as the spray that it generates is too forceful and will damage the stone. ]

The wall cladding isn’t only about selecting the best stone for tiling. The way you install these tiles on your walls can have a great impact on the aesthetic of your wall.

You can either hire a professional to get the tiles installed or try DIY steps. Either way, the tiles must be installed in an appropriate way.

Similarly, it is extremely important to keep the tiles installed on your wall clean all the time. No matter which stone or tiles you choose for ledgestone wall cladding, you need to invest your time and money in its maintenance.

Let’s first have a look at the installation of wall cladding tiles.

 

Installing Wall Cladding Tiles

 

If you want impressive results, then it is best to hire a professional for the wall cladding project. Research the contractors that specialize in installing tiles. Consider their experience, past performances, and reviews from other customers.

You can also try a DIY installation. Here are the steps to install wall cladding:

 

  • Build a Strong Base

 

You need to start a wall cladding project with a strong foundation, especially if you are planning to install natural stones. Remember that if you use poor quality substrate, you will not get the best results.

Brick and concrete are the best materials for building a strong and structural substrate. If you are installing tiles on a new concrete wall, make sure you allow the wall at least 6 weeks to get ready for wall cladding.

build the foundation of the wall cladding

For those who are installing tiles on an existing concrete wall, note that the wall needs to be cleaned thoroughly before the installation.

The longevity of the tiles will depend on the foundation. The better you clean your wall, the stronger the tiles will adhere.

 

  • Prepare the Surface

 

No matter which material you choose for substrate construction, the wall has to be cleaned properly. Remove dirt, dust, debris, other contaminants accumulated on the surface.

Likewise, you need to remove waxes, paint, and oil from the wall. Cleaning is important since it gets the wall ready for cladding. Moreover, natural stones tend to adhere firmly to a clean wall.

cleaning the wall before stone cladding installation

You can use soap and warm water solution for thorough wall cleaning. It is highly recommended before you get started with the installation process.

 

  • Lay Out the Material

 

Before you get started with the cladding process, lay out the stones on the ground. Each stone may feature color, shape, and size variations.

If you choose natural stones such as travertine, there is a good chance that no two slabs of stones will have a similar appearance. You will notice slight variations in the color, texture, and shape of these stones.

stackstone layout on the floor before installation to wlal

Do not mistake these variations as flaws in your stone. It rather makes these natural stones look even better and more beautiful.

By laying these stone slabs on the ground, you can get a clear picture of the variations. You can arrange the stones on the walls in a way that each piece looks aesthetically pleasing.

 

  • Use Adhesive

 

A strong adhesive guarantees longevity and impressive results. Make sure you choose the best adhesive to attach the stones on your wall.

The contractors you choose for the installation will offer you the best recommendations. You can also ask the stone supplier to suggest the leading adhesive supplier.

Clean each stone with warm water to remove dust before applying adhesive. You will need to apply adhesive to the substrate and each stone.

Make sure you wear safety gloves when applying adhesive. Remove the adhesive residue from the wall instantly after the application. Place the stone slab on the wall and leave it to dry for the next 24 hours.

 

  • Clean the Wall

 

As mentioned before, it is important to clean the stones after installation. You may also need to seal the stones so that they do not get stained from liquid spills.

You can purchase the best quality sealant from a local retail store. A high-quality sealant will not only keep your wall from hideous stains and marks, but it increases the durability of the tiles.

Sealing is extremely important if you are installing wall cladding in the bathroom, around your swimming pool, and other wet areas.

There is a chance the stones will lose their shine and color if exposed to moisture and contaminants. Sealing your wall after tile installation will guarantee extra protection. It keeps your cladding safe.

Before you seal the area, clean it thoroughly with a warm water solution. You can use light cleaning detergent, but do not apply a strong chemical to the newly tiled wall.

Moreover, we recommend you seal the area at least 48 hours after the installation. You can ask the stone supplier or the installation contractor for the best sealant material for walls.

Alternatively, you can research the best sealants for wall cladding on the internet.

 

  • Bottom Line

 

So, these were the steps for installing wall cladding. Make sure you purchase a reliable and strong sealant for sealing the wall after installation. Follow the basic cleaning and maintenance steps to keep your wall clean.

 

Conclusion

 

Cleaning and installation of the stone wall cladding is easy. But, if you looking for expert advice on your stack stone or loose stone wall cladding installation, feel free to contact stone pavers Australia.

Our expert stone masons can help you a few important tips and if needed can assist you installation for cheaper cost, 

Get FREE Quotes + FREE SAMPLES by Stone Pavers Australia

Stone Pavers are the LARGEST Natural stone providers across Australia. We are known for providing quality products at low prices.

If you are looking for buying Stackstone, Ledgestone or Loose stone wall cladding any other stone tiles in Melbourne, Sydney, Brisbane, Adelaide or anywhere across Australia.

Give us a call today on 03 9706 9767 and receive a FREE QUOTE or you can request an express posted FREE SAMPLE before purchasing our products.

Simply fill our contact us form for the orders or free sample inquiries.

Get some installation ideas from our beautiful Stone Wall cladding image gallery.

 

Wall cladding sale sticker by stone pavers australiaExpress posted free samplescall to order tiles in melbourne- sydney-brisbane-canberra-adeliade

STACK STONE – What’s available for sale here in Australia in 2020

Stack Stone – What’s Available for Sale Here in Australia in 2020?

 

 

Stack stone is one of the traditional and natural construction materials. The stone is extensively used for different types of indoors and outdoors construction applications. Since it is a natural stone, no two stack stone pieces have the same texture and colour. Slight variations can be noticed in different slabs of stacked stone. But, that’s what makes this stone stunning. You could find a broad range of stack stones that are available in multiple colours and designs. If you shop for these natural pavers online, you will get to choose from multiple options. The most common colours include dark grey, light pink, black, burnt orange, and more.

Commonly known as the cultured stone, the popularity of stacked stone is growing rapidly, especially in Australia. These natural stones are available for sale in Australian natural stone markets. Stacked stones are trending in 2020. Being embraced by multiple homeowners and architects, these cultured stones are seen on the interior and exterior walls, around the fireplace wall, on the kitchen back splash wall, etc.

 

Different Designs of Stacked Stones in Australian Markets

 

Nowadays, more and more contractors have started to design homes using stacked stones. These natural décor materials add a unique level of elegance and beauty to a dull and traditional-style home. Now, renovating your old-school home is as simple as installing some high-quality and premium stacked stones on your exterior and interior walls. It enhances the curb appeal of your home and increases the value of your property.

One interesting quality of the stacked stone is its depth. The slight colour variations in each slab along with the depth make these natural stones the number choice of homeowners. You can choose from some warm and neutral tones if you would like to keep the décor simple. Stacked stones are also available in some bold and stylish hues that give a contemporary touch to your home.

Not a lot of products have the potential to make such an amazing impact on the bare walls of your exterior space. Not only does it enhance your exterior space, but stacked stones can liven up your interiors too. You could decorate the wall surrounding your fireplace with these stones. You can also create a feature wall. Let’s take a look at the top stacked stones that are available for sale in Australia this year.

 

  • White Quartz

 

 

A beautiful combination of white and sand-coloured stone, white quartz is a fine stacked stone. If you are looking for a cost-effective way to turn your boring plain walls into natural stone walls, then white quartz will be your ultimate pick.

The stones are available in the panel form, which makes the installation process quite simple and smooth. Owing to its straightforward installation and smooth texture, white quartz has become one of the most sold natural stones in the Australian natural stone markets. Even interior designers have started to pick white quartz for wall cladding.

It is mainly installed on the wall surrounding the fireplace. Used especially for residential and commercial applications, white quartz is the homeowner’s ultimate choice.

 

  • Soft Cream Marbles

 

 

As the name suggests, soft cream marbles add a neutral and warm tone to any interiors. No matter what décor theme you follow, soft cream marbles stones will be a perfect home décor option. The stone is designed to add a contemporary touch to your traditional-style walls. You can never go wrong with these soft tones of cream. This natural stone resembles marble. If you are looking for marbles for your interior floors or exterior landscape at a reasonable price, then save some bucks with this natural stacked stone.

 

  • Rustic Browns and Reds

 

 

If you want to add some dark tones to your interiors, then rustic brown and red is your best option. These shades look quite bold. If you have all your walls painted with light and warm tones, then the stacked stone available in rustic brown and red shades can liven up your space. It is all you need to introduce the earthy tone to your interior design.

Since each panel will have slight variations in colours, you will get a combination of brown and red slabs (each stone featuring a unique shade). We highly recommend this for modern and traditional style apartments. It looks stunning above the fireplace. You can install these red and brown stacked stones on your patio and exterior walls as well.

 

  • Grey and Silver Quartz

 

 

Do you want a neutral design palette on your wall? Well, grey and silver quarts stacked stones will look extremely stunning on the facade. It can brighten up the dull and traditional space. They look wonderful when paired with bold hues. Unlike the standard stacked stones, grey and silver quartz is known for the consistency. Each slab features almost same hues with slight variation. These light tones are a perfect option for modern and minimalist style homes.

So, these were the top five types of stacked stones that are gaining popularity in the Australian market. Choose your favorite design and enhance your interiors and exteriors. 

 

Conclusion

 

Stackstone is an extremely popular style for decorating your wall for a water feature, TV cabinet Wall decoration, Fireplace cladding, Pool surrounding sitting areas, patio wall decoration, outdoor kitchen wall cladding and similar other indoor &outdoor wall decorations and more. 

Stack stones widely vary in style and stone sizes such as Leight weight Stackstone cladding, Ledgestone stone wall cladding, Loose Stackstone Wall cladding and more. Feel free to browse our range of Stack stones available on our website. Currently on BIG SALE. 

If you are looking for advice on the best usage of Stackstones and how to lay them or install using which adhesive? Give our team of experts a call today on (03) 97069767 and get the answers of all your questions. Additionally, You can also visit our Showroom located in Melbourne. If you are an interstate customer take a ride down to our virtual showroom.

Finally, if you really want a stack stone, why not try our FREE SAMPLE services. Yes! we provide Express Posted FREE SAMPLES to all our customers Australia Wide and provide orders delivery Door-to-door in Melbourne, Sydney, Brisbane, Canberra, Adelaide, Hobart, Geelong and more.

Simply contact us and get your FREE Sample delivered at your doorstep.

Call us for more information on Delivery services.

Hope you enjoy reading our Blog. Wish to see you soon. 

Stack stones tiles and pavers on saleExpress posted free samplescall to order tiles in melbourne- sydney-brisbane-canberra-adeliade

Stacked Stone, Stack Stone, Wall Tiles, Stone Wall, Stackstone

Stacked Stones, Stack Stone, Wall Tiles, Stone Wall

 

Stackstone, also known as stacked stones, is the centuries-old natural stone that is extensively used in the exterior décor projects. The stones are used for construction purposes.

This pattern of construction has become quite popular these days. Homeowners use stacked stone for the interior wall cladding and flooring. Stacked stones are made of the small slabs of the natural stones. These natural stones are used for wall cladding and tiling applications. One interesting quality of these stones is its dry-stacked look. You do not need grout for its installation.

 

 

As mentioned before, stacked stones had been used in the construction project in the 19th and 20th centuries. They were mainly used in Europe. Some stacked stones building still stands intact. Earlier, contractors used multiple natural stones and laid them in the vertical stack pattern.

Surprisingly, they wouldn’t even use concrete and other material for binding. They were positioned in a way that each stone was capable of enduring the weight of other stacked stones seamlessly. Installing stacked stones on the floors or walls need professional contractors. It is a labor-intensive job. Though you can try to DIY the installation of the stacked stone, chances are you will not get the best finish.

 

Stacked Stones Uses

Owing to their stunning aesthetic and durability, stacked stones can be used for a host of exterior and interior décor applications. You could use these stones to create a feature wall, such as surrounding the fireplace. Stacked stones are most commonly used for wall cladding. They are used to decorate the kitchen backsplash, bathroom wall, etc.

Additionally, you can choose the stackstone to highlight the interior or exterior décor. You can use these stones to decorate the wall around the front door. If you are looking for natural décor options, then the stacked stone is your best option. It gives a natural touch to your exteriors. Besides, they look stunning – no matter where you install them.

 

Selecting the Best Stacked Stones

Since they are made of natural stones, you will find a great level of variation in the colours, pattern, design, and shapes of these pavers. You need to select the stacked stones before getting started with the construction project. Make sure that you won’t get an option to switch the stones or change its palette once they are installed on the walls.

You can choose the natural stacked stone if you would like to keep the décor minimal and elegant. Another option is the polished stone, which looks a little glossy yet stunning. Granite and quartzite are the best materials for polished stacked stones. The cost of the stones will depend on the material you choose. The polished stones are costlier than natural materials.

 

We have dozens of various colours and styles of stack stone.

 

“Smokey Quartz Light Weight stack stone cladding”

 

Light weight stack stone cladding with a 3D geometric style: Modern twist on a natural stone look mounted onto a stack stone panel for easy installation.

“Uluru Ledgestone Wall Cladding”

 

Ledgestone, stack stone cladding: Drystack look, rugged look, Individual pieces are MUCH bigger BUT still mounted on a stack stone panel for easy installation of your stone cladding.

 

“Sandstone Loose Wall Cladding”

 

Loose Random Stone Wall Cladding: Natural Free Flowing Format stone cladding for walls. A bit slower to install BUT what a look.

See our stack stone range here.

 

Conclusion

 

Stackstone is an extremely popular style for decorating your wall for a water feature, TV cabinet Wall decoration, Fireplace cladding, Pool surrounding sitting areas, patio wall decoration, outdoor kitchen wall cladding and similar other indoor &outdoor wall decorations and more. 

Stack stones widely vary in style and stone sizes such as Light weight Stackstone cladding, Ledgestone stone wall cladding, Loose Stackstone Wall cladding and more. Feel free to browse our range of Stack stones available on our website. Currently on BIG SALE. 

If you are looking for advice on the best usage of Stackstones and how to lay them or install using which adhesive? Give our team of experts a call today on (03) 97069767 and get the answers of all your questions. Additionally, You can also visit our Showroom located in Melbourne. If you are an interstate customer take a ride down to our virtual showroom.

Finally, if you really want a stack stone, why not try our FREE SAMPLE services. Yes! we provide Express Posted FREE SAMPLES to all our customers Australia Wide and provide orders delivery Door-to-door in Melbourne, Sydney, Brisbane, Canberra, Adelaide, Hobart, Geelong and more.

Simply contact us and get your FREE Sample delivered at your doorstep.

Call us for more information on Delivery services.

Hope you enjoy reading our Blog. Wish to see you soon. 

Stack stones tiles and pavers on saleExpress posted free samplescall to order tiles in melbourne- sydney-brisbane-canberra-adeliade

Contact Us
close slider